Scenario and Digital Validation

Scenario and Digital Validation · Product Industrial Design (Blender & Digital Twin) course

Objectives

Find design bugs on screen before wasting plastic: run usage scenarios on the Twin, pair firmware/edge AI data with the model, and produce a fix list before printing a prototype.

Lessons

#	Lesson	Content
1	Digital validation before building a prototype	Designing a test scenario before clicking anything, observing and adjusting the design, tying the model to firmware/edge AI data with evidence, and a pre-print checklist summary
2	Lab: usage scenarios and a pre-prototype checklist	Writing the scenario before clicking, running it and noting problems, binding data or recording the gap, then filling in the pre-prototype checklist

Approximate time per the original: about 3 hours (lessons) + a 2.5–3 hour lab.

Accompanying sheets and templates (in the resources/ folder of lesson 1):

• pre-prototype-checklist.md

Checkpoint

Before moving to the next module, check that you can do the following:

• At least two usage scenarios with screenshots
• At least three problems or watch-points identified
• Evidence of a data binding, or a written explanation of the gap
• A pre-prototype checklist with the top 3 fixes

← Module 4 · Course page · Module 6 →