Cheatsheet — Peripheral ↔ Driver API Map (M03)

This content is not available in your language yet.

Course 1 · Module 3

จดชื่อฟังก์ชันจริงที่ใช้ในโปรเจกต์ตัวอย่าง — snippet อ้างอิงจาก TESA Firmware SDK (ดูตัวอย่างเต็มใน Lesson)

Quick picker (TESA SDK)

งาน	API ที่แนะนำ
LED on/off	`led_controller_set(LED_RED, true)`
LED toggle	`led_controller_toggle(LED_GREEN)`
LED all off	`led_controller_off_all()`
Raw pin toggle	`Cy_GPIO_Inv(CYBSP_USER_LED1_PORT, CYBSP_USER_LED1_PIN)`
Button init	`cm55_button_init()`
Button pressed CB	`cm55_button_on_pressed(BUTTON_ID_0, cb)`
UART text	`printf(...)` / `LOG_INFO("SRC", "...")`
UART raw	`cm55_uart_send(buf, len)`
I²C SHT40	`sensor_sht40_startup()` · `sensor_sht40_read(&s)`
I²C bus lock	`cm55_i2c_manager_i2c_lock()` / `unlock()`
ADC POT	`cm55_adc_init()` · `cm55_adc_read_pot_mv()`
PWM brightness	`bitstream_led_pwm_init()` · `bitstream_led_pwm_set_brightness(id, 0..100)`
Delay in task	`vTaskDelay(pdMS_TO_TICKS(ms))`
Create task	`xTaskCreate(...)` (รายละเอียด M04)

แหล่งตัวอย่างออนไลน์: TESAIoT Developer Hub

งาน	กลุ่ม	Header ที่ `#include`
Init / set LED	GPIO	`led_controller.h`
Button callback	GPIO	`sensor_button.h`
UART print	UART	`stdio.h` / `app_log.h`
PWM duty	PWM	`bitstream_led_pwm.h`
ADC read	ADC	`sensor_adc.h`
I2C sensor read	I2C	`sensor_sht40.h` (หรืออื่น)
Task delay	Timer/RTOS	`FreeRTOS.h` · `task.h`

แหล่ง	ลิงก์
HEX / Flasher / demos	TESAIoT_Hackathon
Host / Digital Twin	Bitstream Studio

Content is licensed CC BY-NC 4.0. Reuse it non-commercially and credit the Thai Embedded Systems Association (TESA) every time. · How to cite TESA