Scale and block checklist — Course 3 M01

Course 3 · Module 1

Lesson · Lab · TOC

---

Setup

Item	Your value
Blender version
Unit System	Metric
Length display	Millimeters
Unit Scale	0.001 (team default) / other:
Track	A — measured board / B — placeholder 80×55×1.6

---

Concept notes (short)

Question	Answer
How is the device held / placed?
Which ports must be visible?
Which sensors need openings?
Lid opens which way?

---

Size source

Item	Value
PCB source (calipers / datasheet / kit doc URL)
PCB X × Y × thickness (mm)
Tallest component height above PCB (mm)
Clearance each side (mm)
Planned wall thickness (mm)
Top air gap (mm)
Bottom air / base (mm)

Kit / docs used (if any):

• KIT_PSE84_EVAL guide
• Other:

---

Calculated enclosure outer (before modeling)

Axis	Formula notes	Result (mm)
Outer X
Outer Y
Outer Z

---

Blender objects

Object name	Dimensions X×Y×Z (mm)	Scale applied 1,1,1?	Origin set?
PCB_placeholder		Yes / No	Yes / No
Enclosure_block		Yes / No	Yes / No
(optional)

---

Fit check

Check	OK?	Notes
Wireframe: PCB inside enclosure
No accidental poke-through
Clearance roughly matches plan

---

Files

File	Name
.blend
Screenshot

---

Quick recall

Units (Metric + mm + Scale 0.001)
  → measure / placeholder PCB
  → calculate outer with clearance + wall
  → Enclosure_block
  → Apply Scale + name objects
  → screenshot + this checklist

Online refs (click when stuck)

• Blender Scene Units
• Apply Scale
• Set Origin
• Enclosure clearance guide
• Electronics enclosure steps

Lesson · Lab · M02